Fitting a Trophy and Medal Display

  1. Hold the medal display against the wall where you would like to install it. Use a level to adjust the display. Mark the mounting holes using a pencil.
  2. Use a drill and drill the holes where you marked the wall with the pencil, it is recommended you use drywall anchors to help secure your display. Attach the spacer to the wall using appropriate screws. Use the acrylic spacers supplied on the large attachment, place these in between the attachment and wall, depending on your wall you may need to use 2 or 4 to ensure back panel sits straight.


  3. Attach the display and secure with the top threaded screw caps.




  4. Slide shelf into position ensuring front screws on the mounts are not obstructing.
  5. Tighten front screws . Do not over tighten as this may damage the shelf.
  6. Stand back and admire your display.